RF Welding Solutions
- Mold Design and Fabrication
- Process Development
- Sample Runs for Evaluation
- Validation Support
RF Welding medical disposable pouches, automotive seat cushions, air bladders etc.
20" x 30"
8 - 10 kWatt Hybrid RF Generator
27.12 MHz Frequency
Allen Bradley PLC
12" Touch Screen PC HMI
200-240VAC / 65A / 50-60Hz
80 psi / 5bar - Clean Dry Air (CDA)
118" x 46" / 299cm x 116cm - RF Welder
24" x 32" / 61cm x 81cm - RF Generator
4500lb / 2100kg
ISO 13485-1 / UL-508C, NFPA 79A / Safety
Documents available for IQ, DOE and Die FAI
OQ at customer site per request
65-95°F / 18-35°C
68% Max Humidity Non-Condensing
Max 2000m elevation
90% Reduction of RF Sealing Arcs & Die-Burns when using ONEX RF sealers.
Increased production yields due to process consistency and RF Seal integrity.
50% more power efficiency when RF sealing with Hybrid RF Generator technology.
Customer was using older RF sealer and constantly had issue with arcs and down time. He was manufacturing commercial low volume products. Needed an RF welder so he could utilize single press with multiple dies without any change.
ONEX RF Solution:
We provided the standard dual shuttle RF welder with 4 RF switches, so at any time the customer could turn on the switch to a specific product sealing and the others dies would be off.
This was possible because ONEX RF welders use an auto tuner, which automatically tunes to any die and produces flawless products. We provided the following systems:
For quick response, please provide details of your product, process needs, and full contact information.